RAKWIRELESS · WISMESH TAG
Off-grid messaging.
Location sharing in your pocket.
A slim, ready-to-use Meshtastic tracker with built-in GNSS, a 1000mAh battery and an IP66 enclosure. Pair with the Meshtastic app over Bluetooth for location sharing and mesh messaging beyond cellular coverage.
nRF52840 + SX1262 · GPS/GNSS · Internal antennas
Available in Classic Black.
Clip on and head out
The compact, display-free design fits a pocket, lanyard or backpack. Internal LoRa, Bluetooth and GNSS antennas keep the enclosure streamlined.
- IP66 enclosure: dust-tight and protected against powerful water jets; not intended for immersion.
- AT6558R GNSS: position reporting for outdoor tracking.
- LIS2DH accelerometer: integrated motion sensing.
- 1000mAh battery: magnetic USB charging with the included cable.
Range and battery life depend on terrain, network coverage, GNSS use, radio settings and traffic.
Simple controls. Easy charging.
Arrives pre-flashed with Meshtastic firmware. A user button, reset/boot access and status LEDs help with day-to-day use and firmware maintenance.
- Magnetic 4-pin charging connection
- Charging, activity and message status LEDs
- Reset and bootloader access for supported firmware updates
- No built-in screen; configure using a compatible phone or client
Fully charge before first use. Button behavior depends on the installed firmware.
Technical specifications
| MCU | Nordic nRF52840 |
|---|---|
| LoRa radio | Semtech SX1262 |
| Memory | 1MB Flash / 256KB RAM |
| LoRa bands | 8xx and 9xx MHz support; configure the appropriate Meshtastic region |
| Positioning | AT6558R GNSS |
| Motion sensor | ST LIS2DH accelerometer |
| Antennas | Internal LoRa, Bluetooth and GNSS antennas |
| Battery | 1000mAh internal rechargeable battery |
| Charging | Magnetic 4-pin connection, supplied USB cable |
| Enclosure | IP66 |
| Dimensions | 90 × 50 × 7.5 mm |
| Operating temperature | −20°C to +60°C |
| Firmware | Meshtastic pre-flashed |
| Display | None |
Get started with Meshtastic
- Charge the device using the supplied magnetic USB cable.
- Install the Meshtastic app and pair with the device over Bluetooth.
- Set the correct region, channel and network settings for your deployment.
- Take the device outdoors for GNSS reception, then test messaging and location sharing with your mesh.
The 8xx/9xx MHz radio supports regional configurations; select the appropriate region in Meshtastic. Mesh messaging requires compatible devices and matching settings. This is a Meshtastic device, not a cellular GPS tracking service.
In the box
- 1 × WisMesh Tag in Classic Black
- 1 × USB magnetic charging cable
- 1 × neck strap











Reviews
There are no reviews yet